-
Product DescriptionCompany Info.<>
- Processing customization:
- Yes
- Model:
- 6105BP
- Measuring range:
- 1000
- Measurement accuracy:
- 0.05
- Overall dimension:
- 400 mm
- Display mode:
- Chinese LCD
- Working environment:
- normal temperature
Belt weigher6105Bfeeder controller6105BPweighing display controller6000totalizer6001Btotalizer
Weighing control instrument is a microcomputer-based dynamic belt scale and batching control instrument. The man-machine dialogue is adoptedto directly display the weighing flow and relevant information in Chinese form on the VFD screen, which is especially convenient for operation and calibration. The instrument has automatic zero calibration, automatic interval calibration, fault alarm automatic diagnosis, optical isolation input/output, standard serial port, built-inPIDcontrol output.
2. Environmental parameterweighing control display9000series DL-9901KYweighing control instrumentweighing integrator,XZSYDL-DL 9902Jweighing control instrumentDL 9902J, chain code instrumentDL 9801J,speed measuring deviceRCS-CS FH-06- 6000P,FH-06T-6000P integrator
1. Storage temperature-40℃—— +70℃; Operating temperature-10℃——+50℃;
2. High relative humidity:95%
3. Power supply
220VAC+10%~—15%50Hz;fuse0.5A;EMI/RFIfilter
4. Weighing sensor
The instrument provides10VDC,200mAexcitation power supply, and 4 load cells can be connected in parallel.
Sensitivity:0.5mV/V-3.5mV/V,*Large input signal33mV
The load cell is shielded to ground,andthe excitation compensation circuit jumper is used to select local or remote compensation when the cable distance is greater than 60 meters (not more than 900 meters).
5. Motherboard digital input port
The instrument board providesthreeprogrammable input ports to receive dry contact switch signals.
6. Motherboard digital output port
The instrument board provides3programmable output ports,24VDCopen-collector output, which can directly drive the control relay.
7. Communication board
The instrument can be equipped with a communication panel. StandardRS-232,RS-485serial interface can be used to collect instrument data and operate the instrument with two-way communication function.
8, the main performance
Four lines of display, menu selection,5status indicators,current output for material flow or load,pulse output for total material weight,
Automatic zeroing, spacing, automatic zero-tracking,digital inputs and outputs for opto-electronic coupling,alarm and fault indication
Communication function:RS232,RS485multi-station communication network, one-way process control mode:PIDcontrol output
9. Main functions
The software for all functions is embedded in the memory chip, and the controller will automatically turn on the corresponding function when the user installs the optional expansion board or the operator selects it through the keyboard.
(1)Measurement function
a. Instantaneous flow calculation
The load cell output unit weight signal is multiplied by the speed sensor output unit belt speed signal, and the result is instantaneous flow.
b. Weight accumulation
Cumulative is the sum of weight per unit length and running length, then converted to engineering units.
C. Automatic zero adjustment and automatic interval adjustment
By defining the number of belt turns and belt length is the basis for automatic zeroing and automatic spacing.
Accurately calculating the belt length, the controller calculates the number of pulses emitted by the speed sensor. When the required number of pulses is accumulated, the controller ends the calibration test, compares the theoretical value with the actual value, and calculates the calibration constant.
d. automatic zero tracking
When the belt is running and the flow rate is lower than a predetermined value, the controller performs automatic zeroing as follows
Waithalf the test cycle (Z will be displayed“”)
- -Complete a zeroing test
――Automatic zeroing for completing a test cycle
- -The meter will repeat the above steps as long as the flow value is below the autozero tracking predetermined value.
e. One input, two current output signals
Optional input/output expansion board for one voltage/current input and two current outputs
(2)Monitoring function
Status prompt,process alarm,setting error,equipment failure,high flow, low flow, high load, low load alarm
(3)Automatic control feeding function(Xuzhou6000)
Weighing controller provides an independent control current loop, control current loop is usually used to control the amount of feed, control mode:
PID= proportional + integral + derivative
The controllable process variable is the feed rate, and the flow rate setting can be set by keyboard input or external analog signal. The control output is a4-20mAcurrent loop.
- Name（chinese）
- Name（English）
- Xuzhou Weightec Measurement and Control Technology Co., Ltd.
- China credit code
- Identity Verification
- Registered Capital
- 5,200,000 CNY
- Operating term
- 2011-07-18 ~ 2031-07-17
- Address
-
Gulou District, Xuzhou, Jiangsu, China
- Nearby port
- Rizhao,Lianyungang,Shanghai
Xuzhou weightec Measurement and Control Technology Co., Ltd. specializes in the development, production, sales and after-sales service of industrial weighing, process testing and control, conveyor protection devices, mechanized sampling systems, intelligent instruments and other equipment. The products are widely used in power, coal, metallurgy, chemicals, building materials, ports and other industries. In addition to accurate weighing and reliable performance, they also have the characteristics of simple installation, easy maintenance, and multiple control functions. The company's main products include electronic belt weigher series, belt weigher calibration device, weighing coal (material) feeder series, batching system, online protection device, sampling system and automation system. At the same time, we cooperated with CELTRON Company of the United States and represented the load cells of CELTRON Company of the United States. The company has strong technical force, sophisticated equipment, stable and reliable product quality, timely and thoughtful service, and has passed long-term on-site operation verification and is deeply trusted and praised by users. The company adheres to the principle of "everything is customer-centered" and implements "leading products, first-class quality, and first-class service". Adhere to our credibility and provide sincere services to every customer, and work together to create a better future.- Name（chinese）
- Name（English）
- Xuzhou Weightec Measurement and Control Technology Co., Ltd.
- China credit code
- Identity Verification
- Registered Capital
- 5,200,000 CNY
- Operating term
- 2011-07-18 ~ 2031-07-17
- Address
-
Gulou District, Xuzhou, Jiangsu, China
- Nearby port
- Rizhao,Lianyungang,Shanghai
Xuzhou weightec Measurement and Control Technology Co., Ltd. specializes in the development, production, sales and after-sales service of industrial weighing, process testing and control, conveyor protection devices, mechanized sampling systems, intelligent instruments and other equipment. The products are widely used in power, coal, metallurgy, chemicals, building materials, ports and other industries. In addition to accurate weighing and reliable performance, they also have the characteristics of simple installation, easy maintenance, and multiple control functions. The company's main products include electronic belt weigher series, belt weigher calibration device, weighing coal (material) feeder series, batching system, online protection device, sampling system and automation system. At the same time, we cooperated with CELTRON Company of the United States and represented the load cells of CELTRON Company of the United States. The company has strong technical force, sophisticated equipment, stable and reliable product quality, timely and thoughtful service, and has passed long-term on-site operation verification and is deeply trusted and praised by users. The company adheres to the principle of "everything is customer-centered" and implements "leading products, first-class quality, and first-class service". Adhere to our credibility and provide sincere services to every customer, and work together to create a better future. -
Send your message to this supplier*From:*To:
Mr. zhang dehua
*Message:Inquiry
Copyright © 2003 - 2025 Goepe.com All rights reserved.